Description
The Ecosoft Pink 100 eFree water softener is designed as a space-saving, high-performance solution for homes facing hard water. With its ultra-compact dimensions and under-sink-compatible design, it fits neatly into tight spaces—such as kitchen cabinets or utility rooms—while delivering full household softening. The system uses high-quality resin and a premium valve technology to remove calcium and magnesium ions, preventing limescale deposits in plumbing, appliances and fixtures. Thanks to its intelligent regeneration cycle, it optimises salt and water usage, making it economical to run. In essence, the Ecosoft Pink 100 eFree provides the benefits of soft water (longer appliance life, less detergent, improved comfort) in a compact, efficient package, tailored for smaller dwellings or installation-restricted spaces.
Technical Specifications
| Parameter | Value |
|---|---|
| Operating flow rate | 1.2 m³/h (≈1200 L/hour) |
| Quantity of media (resin) | 10 L |
| Volume capacity* | 2 m³ (for hardness 5 meq/L = 250 mg/L CaCO₃) |
| Salt usage per regeneration | 0.8–1.0 kg (typical) |
| Water usage per regeneration | 0.08 m³ (≈80 L) |
| Duration of regeneration | 80–110 minutes |
| Pressure drop in service mode | 0.5 bar |
| Inlet pressure | 2–6 bar |
| Electrical requirements | 230 V, 50 Hz |
| Power consumption | 30 W |
| Inlet/outlet pipe connections | ¾″ |
| Dimensions (H × W × D) | 470 × 270 × 430 mm |
| Weight (dry) | 18.8 kg |
| Maximum influent hardness | 15 meq/L (750 mg/L CaCO₃) |
| Maximum iron in influent | 0.2 mg/L |
| Maximum manganese in influent | 0.05 mg/L |
| Required sediment pre-filtration | 100 µm |
*Assumes inlet hardness of 250 mg/L CaCO₃; actual capacity will vary with higher hardness levels.
