Description
Le Nice Double Dimmer-Control Z-Wave is a compact, smart lighting control module designed to manage two independent lighting circuits from a single device. Using Z-Wave Plus wireless technology, it allows you to switch lights on and off, adjust brightness levels and integrate lighting into your smart home automation system.
Designed for installation inside a standard wall switch box, this dual-channel dimmer offers flexible lighting control for residential applications. It supports a wide range of lighting technologies, including 220–240 V LED lamps, 12–24 V LED or halogen lighting with compatible dimmable electronic transformers, and dimmable LED drivers such as those used in LED strips.
The module can be controlled remotely through a compatible Z-Wave gateway or locally using traditional wall switches. Its built-in energy monitoring capabilities also provide information about active power consumption, total energy usage and mains voltage, helping users monitor their lighting installations more effectively.
With two independently configurable outputs, the Nice Double Dimmer-Control can operate two separate lighting circuits or combine both channels to control a single higher-capacity load.
Spécifications techniques
| Spécifications | Détails |
|---|---|
| Nom du produit | Nice Double Dimmer-Control |
| Type de produit | Dual-channel smart dimmer module |
| Alimentation électrique | 220–240 V CA, 50/60 Hz |
| Wireless communication | Z-Wave Plus (800 Series) |
| Fréquence radio (UE) | 868,4 MHz / 869,85 MHz |
| Maximum transmission power | +6 dBm |
| Portée sans fil | Up to 100 m outdoors / 30 m indoors |
| Nombre de canaux | 2 independent channels |
| Maximum load per channel | 0.3 A (up to 70 W at 230 V, power factor = 1) |
| Combined maximum load | 0.6 A (up to 140 W at 230 V, power factor = 1) |
| Supported lighting loads | 220–240 V LED lamps; 12–24 V LED or halogen lamps with dimmable electronic transformers; dimmable LED drivers |
| Consommation d'énergie en veille | Less than 500 mW |
| Active power consumption | Less than 1 W |
| Protection de l'environnement | Individual overcurrent protection per channel |
| Température de fonctionnement | 0°C à +40°C |
| Maximum ambient humidity | 95% (non-condensing) |
| Indice de protection | IP20 |
| Installation requirements | Wall switch box with a minimum diameter of 50 mm and depth of 60 mm |
| Dimensions (H × L × P) | 45 × 37 × 20 mm |
| Certifications and compliance | CE, RoHS 2011/65/EU, 2015/863/EU and RED 2014/53/EU |















